19-09-2020 • Welcome to TENAX Universe
CLEANERS FOR QUARTZ AGGLOMERATES
Solvent-based liquid cleaner, specific for removing greasy dirt and marks left by suction cups used in handling slabs. It penetrates into the material and removes the stains present. Manual application.
How to apply:
Pour the product directly onto a clean cloth and clean the slab in a evenly.
If the dirt is stronger, apply the product, distribute it evenly with a cloth and leave for 1-2 minutes, then, rub with the same cloth, making circular mouvement, until the marks are removed. If the problem persists, we suggest a new application, prolonging the contact time. Coverage: 40-50 grams per meter. With 1 liter of product I can treat 20-30 square meters.
Use in a well ventilated area, to avoid the accumulation of unpleasant odor. When a surface is treated for the first time, it is good to evaluate its effect on a sample or on a hidden corner, just because some materials could quickly loose part of their gloss. In the case of Quartz with high gloss degree and very fine grain, the product can partially remove the polish, in a very short time, around 10-20 seconds.
Attention: do not exceed the maximum contact time of 2 minutes.
Where to apply: agglomerates
Density a 25°C gr/ml 0,86
Standard colour limpid